BEng (Hons) Electrical and Electronic Engineering (Degree Apprenticeship)

Our IET-accredited BEng (Hons) Electrical and Electronic Engineering (Embedded Electronic Systems Design and Development Engineer Degree Apprenticeship) allows you to invest in your workforce by combining university education, work-based learning, and ongoing professional development. While working as a valuable part of your team, your apprentices can gain the skills and knowledge needed to design and develop electronic circuits, devices and systems for a range of industries.

Electrical and Electronic Engineering (Degree Apprenticeship)

Key information

Award:

BEng (Hons)

Mode of Study:

Full-time

Duration:

3 years

Location:

University of Bolton

UCAS points:

96

Start date:

To be confirmed

Course Details

Our BEng (Hons) Electrical and Electronic Engineering (Embedded Electronic Systems Design and Development Engineer Degree Apprenticeship) is aimed at those who are committed to developing their career in this challenging and exciting industry. The course has been informed by employers and is accredited by the Institution of Engineering and Technology (IET) on behalf of the Engineering Council for the purposes of fully meeting the academic requirement for registration as an Incorporated Engineer (IEng) and partly meeting the academic requirement for registration as a Chartered Engineer (CEng). This degree incorporates the knowledge, skills and behaviours required by the Level 6 Embedded Electronic Systems Design and Development Engineer (ST0151) so your staff can learn to apply their knowledge of electronics and embedded systems to the design of useful, reliable and safe circuits and devices for manufacture at a competitive cost.

Your apprentices will spend 80% of their time at work and 20% at the University, usually on a day-release basis. Study at the University of Bolton complements learning in the workplace, supporting your apprentices as they learn to understand, enhance, design and support electrical- and electronics-based technology. Offering a solid foundation in the fundamental scientific and mathematical principles underpinning engineering, this course can prepare apprentices for higher-level responsibilities within your organisation. Our expert team will support them as they develop the ability to bring concepts to life through a combination of engineering know-how, engineering problem and system modelling, computer-aided design, testing and manufacturing skill, and engineering management knowledge. We’ll guide your apprentices, helping them gain skills in logical thinking, problem-solving, communication, and teamwork, as well as a focus on quality, ethics, and safety.

This degree apprenticeship allows you to offer structured training, a recognised degree-level qualification, and support towards professional registration with the IET, helping you attract the best new talent and retain valued staff through career progression. Studying flexibly alongside work allows apprentices to put their new skills and understanding into practice without delay, benefitting your organisation immediately.

If you’re looking for undergraduate-level training in this subject area but don’t work for an employer offering apprenticeships, please see our related courses section for details of study opportunities that don’t require current employment.

Highlights
  • When apprentices successfully complete the end point assessment for this course, they will receive a degree apprenticeship certificate from the relevant awarding body and be awarded an academic degree – the BEng (Hons) Electrical and Electronic Engineering from the University of Bolton.
  • This degree is accredited by the Institution of Engineering and Technology (IET) on behalf of the Engineering Council for the purposes of fully meeting the academic requirement for registration as an Incorporated Engineer (IEng) and partly meeting the academic requirement for registration as a Chartered Engineer (CEng).
  • Face-to-face sessions and one-to-one support are offered by our team of dedicated and experienced academics. We offer expertise in fields such as smart grid, power systems, electrical machines, power electronics, digital electronic systems, signal processing, embedded systems, sensor networks, instrumentations, control systems and wireless communications.
  • During the final stage of the course, your apprentice will undertake a substantial work-based research project, the nature of which will be identified and developed through consultation between your organisation and the University. As well as offering your apprentice valuable experience, this live project can offer you genuine insight into potential opportunities or improvements that can benefit your organisation.
Key Features
  • Our approach to teaching and learning is student-centred, so we’ll work with your apprentices on an individual basis, providing tailored help and support throughout their studies.
  • The course includes significant opportunities for problem-based learning in our well-equipped laboratories.
  • We have specialist mathematics tutors dedicated to making mathematics accessible and enjoyable. They have an excellent track record in supporting students to achieve mastery of engineering mathematics and science.
  • Course materials are available online, allowing your apprentices to prepare work in advance and make the most of the highly interactive in-class tuition.
  • Quarterly and annual reviews, where each apprentice, their workplace mentor and a member of our team meet to assess your apprentice’s progress, promote continuing conversation between your workplace and the University. This helps to ensure the success of your apprentices and maximise the value of their studies to your organisation.
  • After successful completion of this course, graduate apprentices can continue their studies with the University of Bolton’s MSc Electrical and Electronic Engineering or MSc in Systems Engineering (Electronic) and Engineering Management, both of which are designed to meet the full academic requirements set by IET and the Engineering Council to achieve Chartered Engineer (CEng) status. These MSc degrees are also available as Level 7 Degree Apprenticeships.
Professional recognition

The University of Bolton’s BEng (Hons) Electrical and Electronic Engineering programme is accredited by the Institution of Engineering and Technology (IET) on behalf of the Engineering Council for the purposes of fully meeting the academic requirement for registration as an Incorporated Engineer (IEng) and partly meeting the academic requirement for registration as a Chartered Engineer (CEng).

After graduation, candidates may have the option to study the University of Bolton’s MSc Electrical and Electronic Engineering or MSc Systems Engineering (Electronic) and Engineering Management programmes, both of which are designed to meet the full academic requirements to achieve CEng status.


  • 96 UCAS points. Please see our guide to the UCAS Tariff for examples of how to achieve these points.
  • An applicant’s Level 3 subjects must include a mathematical-based subject and a science, technology or engineering related subject; for instance, A-level Mathematics and Physics or BTEC 90-credit Diploma in Engineering.
  • An applicant should also have five GCSEs at grade C or above or grade 4 to 9 (or equivalent), including Mathematics, English and a science, technology or engineering related subject.
  • An applicant that has completed a Level 3 apprenticeship in a relevant area (for instance, as an embedded system design and development technician) may be eligible for admission.
  • An applicant that has completed a foundation certificate or access to HE diploma in a relevant subject may be eligible for admission.
  • An applicant with an HND/C in Engineering will be considered for direct entry to Level HE5 if they have good results in Level HE4 mathematics and science. This is subject to fulfilling the University's recognition of prior certification learning (RPCL) procedures through an interview and diagnostic test.
  • Applicants may be required to attend for an interview, complete a diagnostic assessment and/or provide a portfolio of appropriate work.
  • Admission to this programme is only available to candidates who meet the following criteria. 1) They are employed for a minimum of 30 hours per week in a role relevant to the apprenticeship. 2) They have the right to live and work in the UK. 3) Their employer is participating in the Degree Apprenticeship scheme. 4) Their employer is willing to sponsor them to attend the University (times and dates to be determined). Please note that an apprentice cannot be self-employed.
  • If an applicant doesn’t possess GCSEs in English and Mathematics at grade C or above or grade 4 to 9, or hold an equivalent such as Functional Skills Level 2 in Literacy and Numeracy, they will be asked to complete initial assessments for English and mathematics. The results of these assessments will determine whether they are accepted on to the apprenticeship with their current qualifications, or a recommendation of delayed entry is made so they can undertake studies enabling them to achieve the required level of English and mathematics prior to commencing the apprenticeship.
  • If English isn’t the applicant's first language they will also need IELTS 6.0 with no less than 5.5 in any band (or equivalent). We also accept a range of other English language qualifications – please visit our English Language Requirements web page for more details.
  • To be eligible for tuition fee funding through the Apprenticeship Levy, candidates should not normally have already completed a qualification at the same level as the proposed apprenticeship, unless that qualification was gained in a completely unrelated discipline.

Where changes are made to material information contained in this course description or a decision is taken to suspend a course between the offer of admissions and enrolment, we will inform applicants at the earliest possible opportunity and will outline the various options available to the applicant.


The BEng (Hons) Electrical and Electronic Engineering (Embedded Electronic Systems Design and Development Engineer Degree Apprenticeship) programme is designed to meet the Level 6 Embedded Electronic Systems Design and Development Engineer Apprenticeship Standard (ST0151). Developed by employers, consultants and contractors, the apprenticeship standard underpins a highly relevant qualification and professional development pathway. It prepares apprentices to develop the next generations of products such as smartphones, electric vehicles, communications satellites, smart grids and help bring concepts such as connected devices and smart cities into reality.

In addition to technical knowledge, this programme offers your degree apprentices the opportunity to develop a range of key employability skills. These include the ability to use specialist knowledge creatively and innovatively to solve problems, the ability to produce and interpret technical solutions, the ability to explain design ideas, effective communication (spoken and written), good team working skills, project and time management, and strong decision-making skills.

What can I do with this qualification?

This degree apprenticeship aims to support the development of the next generation of electrical and electronic engineers. On successful completion of the end point assessment, apprentices will be well prepared to take on demanding roles in embedded electronic systems design and development in industries such as aerospace, automotive, automation and instrumentation, robotics, telecommunications, information and computer technology, defence, energy (including renewables), transport and consumer electronics.

Graduate apprentices may choose to continue their electrical and electronic engineering training to achieve the professional standards to become a Chartered Engineer (CEng). For instance, the University of Bolton’s MSc Electrical and Electronic Engineering or MSc Systems Engineering (Electronic) and Engineering Management programmes are designed to meet the full academic requirements set by IET and the Engineering Council to achieve Chartered Engineer (CEng) status. These master’s-level courses are also available as Level 7 Degree Apprenticeships.

Graduate apprentices might also choose to pursue further study in a specialist field or research.


Course fees

Apprentices will need to be employed by your organisation for a minimum of 30 hours per week. Your organisation will also need to commit to sponsoring apprentices to complete this qualification.

For further information on how your organisation can access funds to support apprentices, please e-mail connected@bolton.ac.uk.

Whether you’re an employer, employee or school leaver, please visit our Apprenticeship web page for support and advice regarding apprenticeships.

International applications are not possible for this course

As an international student you are not allowed to study this course because of the restrictions on your visa.

We offer a wide range of full-time courses in lots of different subjects, many of our courses start in September and January. If you would like to see what courses are available please visit our Course Search.

Useful information

Apprentices will not be expected to pay tuition fees towards this programme. If your organisation has a wage bill of more than £3 million per annum, then it may be able to fund this Degree Apprenticeship through its Apprenticeship Levy contributions. If your organisation does not pay the levy, it may be eligible for government support to fund apprenticeships. This support, called co-investment, covers 95% of the apprenticeship’s tuition fees with your organisation funding the remaining 5% of the fees.

Important note regarding tuition fees for the 2021-2022 academic year: EU nationals who meet residency requirements (have settled or pre-settled status) may be eligible for ‘Home’ fee status. If you do not meet these residency requirements, overseas fees will apply. Irish citizens living in the UK or Ireland will be eligible for ‘Home’ fee status under the Common Travel Area arrangement. Please read the student finance eligibility 2021-2022 policy on www.gov.uk for information.

The fees for a student’s course of study will be set for the normal duration of that course subject only to inflationary increases – measured by the Consumer Price Index (CPI) recorded in March each year to take effect for subsequent start dates.


For details of how to apply for this course, please choose your status from the options below:

Please contact the programme leader for details of the application procedure. You can find their name, email address and phone number in the Programme Contacts section of this page.

For support and advice regarding apprenticeships, please visit our Apprenticeship web page.

International applications are not possible for this course

As an international student you are not allowed to study this course because of the restrictions on your visa.

We offer a wide range of full-time courses in lots of different subjects, many of our courses start in September and January. If you would like to see what courses are available please visit our Course Search.


Electrical and electronic engineering is a diverse and multi-faceted discipline, so we use a wide range of teaching and learning methods. These are designed to fully engage apprentices, helping them develop the skills, knowledge, self-awareness, and behaviours essential to becoming an Incorporated Engineer (IEng) and a Chartered Engineer (CEng), with particular reference to your organisation and their place within it. Learning focuses on your workplace environment and works towards building the transferable body of knowledge and skills demanded to achieve IEng status and apply this expertise within your organisation. Your apprentices will spend approximately 80% of their time in the workplace, with the other 20% of their time being devoted to off-the-job training and university learning.

Apprentices will be expected to attend formally timetabled classes, including lectures, tutorials, tutor-led in-class exercises, and engage with case studies, laboratory activities, investigations and assignments, in groups and individually. All these activities are designed to help apprentices acquire and develop appropriate concepts, knowledge and skills. Our personal tutor system underpins all our teaching and provides one-on-one support, peer support and individual care and attention.

Other teaching methods, such as open-ended projects and design, make and test activities, provide opportunities to develop creativity and innovation skills. These are designed to meet the professional body accreditation requirements and help apprentices apply, assimilate, and integrate their understanding of the course material. Personal study time is required, along with online learning in the form of maintaining an electronic personal development plan (ePDP). As your apprentices progress through the programme, their studies will become less structured and more open-ended in nature as they develop as independent learners.

Your organisation will need to provide each apprentice with a workplace mentor to support their development. They will also benefit from regular visits from a University tutor. The workplace mentor, University tutor and apprentice will work together to create the individual learning plan required to progress the apprentice’s professional body membership.

For the degree element of this programme, we assess each apprentice’s individual performance through a strategic blend of project or design reports, examinations, portfolios, presentations, blogs and other assignments. Some assessments contribute to their final module marks, while others are designed to help them identify their strengths and weaknesses, and where they need to seek extra support from course tutors. In addition to the assessments associated with the degree programme, apprentices will undertake an end point assessment at the end of the apprenticeship period.

Modules

The modules listed below may be a mixture of compulsory and optional. You may not have the opportunity to study all the modules shown as part of the course.

  • Engineering Environment
  • Introductory Engineering Mathematics
  • Introductory Electrical Principles
  • Introductory Digital Electronics
  • Introductory Analogue Electronics
  • Introductory Embedded Systems
  • Work-based Portfolio and PDP 1
  • Engineering Modelling and Analysis
  • Instrumentation and Control
  • Intermediate Digital Electronics and Communications
  • Intermediate Electrical Principles and Enabling Power Electronics
  • Intermediate Embedded Systems
  • Analogue Signal Processing and Communications
  • Work-based Portfolio and PDP 2
  • Major Project
  • Management and Enterprise in Engineering
  • Electrical Machines and Power Electronic Drives
  • Engineering Electromagnetism
  • Advanced Embedded Systems
  • Work-Based Portfolio and PDP 3
  • Digital Signal Processing
  • Power Systems and Smart Grids
  • Renewable Energies
Assessment methods
LevelAssesment method
Level oneCoursework 73%, Written exams 27%
Level twoCoursework 40%, Written exams 60%
Level threeCoursework 63%, Written exams 37%
Learning activities
LevelLearning activity
Level oneGuided independent study 66%, Scheduled learning and teaching activities 34%
Level twoGuided independent study 78%, Scheduled learning and teaching activities 22%
Level threeGuided independent study 78%, Scheduled learning and teaching activities 22%

Disclaimer

The university will use all reasonable endeavours to deliver your course as described in its published material and the programme specification for the academic year in which you begin your course. The university considers changes to courses very carefully and the university will minimise any changes. Please be aware that our courses are subject to review on an ongoing basis and changes may be necessary due to legitimate staffing, financial, regulatory and academic reasons. The content of course modules and mode of associated assessments may be updated on an annual basis. This is to ensure that all modules are up-to-date and responsive to employment and sector needs. The published course material and the programme specification contain indicative ‘optional modules’ that may be subject to change due to circumstances outside of our control. For this reason, we cannot guarantee to run any specific optional module.

The academic staff detailed above teach across a range of courses in this subject area and may not teach on this course specifically.

Programme Contacts

Felicia Li Chin Ong
Programme Leader

F.Ong@bolton.ac.uk

+44 (0)1204 903397

Akram Bati
Admissions Tutor and Deputy Programme Leader

A.Bati@bolton.ac.uk

+44 (0)1204 903525

Jonathan Kelly
Academic Co-ordinator

J.Kelly@bolton.ac.uk

+44 (0)1204 903134

Enquiry Team
University of Bolton

enquiries@bolton.ac.uk

+44 (0)1204 903903

Related courses

BEng (Hons) Electrical and Electronics Engineering with foundation year

Full-time
Mode of study
4 Years
Duration
48
UCAS Points

University of Bolton

BEng (Hons) Electrical and Electronics Engineering

Part-time
Mode of study
4.5 Years
Duration
96
UCAS Points

University of Bolton

BEng (Hons) Electrical and Electronic Engineering (Degree Apprenticeship)

Part-time
Mode of study
4.5 Years
Duration
96
UCAS Points

University of Bolton

BEng (Hons) Mechanical Engineering (Degree Apprenticeship)

Part-time
Mode of study
60 Months
Duration
96
UCAS Points

University of Bolton

BEng (Hons) Electrical and Electronic Engineering (Degree Apprenticeship)

Part-time
Mode of study
60 Months
Duration
96
UCAS Points

University of Bolton

Postgraduate Options

MSc Systems Engineering (Electronic) and Engineering Management

Full-time
Mode of study
18 Months
Duration

University of Bolton

MSc Systems Engineering (Electronic) and Engineering Management

Part-time
Mode of study
3 Years
Duration

University of Bolton

MSc Systems Engineering (Electronic) and Engineering Management (Degree Apprenticeship Route)

Part-time
Mode of study
3 Years
Duration

University of Bolton

myBolton

Download the app for your smartphone from:

Help Centre

We have the answers to your questions, find all the advice and support in one place.

Part of the University of Bolton Group

Bolton college
Alliance learning
Anderton centre2
Scheme Participant
RiSE pos rgb logo
TEF Silver QQA

Help Centre

We have the answers to your questions, find all the advice and support in one place.

Part of the University of Bolton Group

Bolton college
Alliance learning
Anderton centre2
Scheme Participant
RiSE pos rgb logo
TEF Silver QQA